GUTMANN SOMBRA II Instrucciones De Uso página 12

Ocultar thumbs Ver también para SOMBRA II:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 34
EN
aged appliances may not be put into
operation. Defective parts must be re-
placed with genuine spare parts or parts
specified by GUTMANN. Repairs should
only be carried out by authorised tech-
nical staff.
Activated carbon filter
For activated carbon filters fitted in
GUTMANN extractor hoods (C Version),
please read the separate operating in-
structions provided!
Transport, unpacking, installation
Condensation may occur if the appli-
ance is brought into the installation site
from a cold environment. Please wait
until the appliance has adjusted to the
temperature and is completely dry be-
fore operating it. The acclimatization
period depends on the temperature
difference and the type and design of
the appliance. However, it should be at
least 12 hours.
Connecting the power supply
Check that the rated voltage indicated
on the appliance matches the mains
voltage in your area. Connection to the
incorrect voltage will damage or destroy
the appliance.
Before switching on the appliance,
check that all cables and lines are
properly fitted and undamaged. Make
sure in particular that there are no kinks
in the cables, that they are not pulled
too tightly around corners and that no
objects are resting on them. Also make
sure that all plug connections are se-
curely inserted. Faulty shielding or wir-
ing poses a health hazard (electric
shock) and can destroy other applianc-
es. Appliances with mains plugs are
fitted with a safety-tested mains cable
for the respective country of use and
12
may only be connected to a correctly
earthed safety socket. Otherwise, there
is a risk of electric shock. Make sure
that the socket on the appliance or the
domestic safety socket is easily accessi-
ble so that the mains cable can be un-
plugged from the socket in an emergen-
cy or during servicing and maintenance
work.
Danger of electric shock!
Do not clean the hood with a steam
cleaner or water pressure cleaner. The
hood must be disconnected from the
power supply prior to cleaning.
Design
The extractor hood may be custom-
ised and differ from the diagrams in
these operating instructions. However,
the operating instructions, mainte-
nance, cleaning and installation are
always the same.

Publicidad

Tabla de contenido
loading

Productos relacionados para GUTMANN SOMBRA II

Este manual también es adecuado para:

68/6801em

Tabla de contenido