2. Operation via Switch
(
+
_
( The fan therefor has to be stopped - TW -
function is deactivated when the red LED
flashes ! )
( The device must be in ON mode - TW -
function is deactivated when the red LED
flashes! )
Toggle switch min. Press for
10 seconds until the
goes out!
(The device must be in ON mode
- TW - function is deactivated
when the red LED flashes!)
LED Indicators
Information regarding the operating con-
ditions of the hood can be read on the
device's LED indicators:
(located behind the glass front)
LED on: Display operating status ON /
LED on: flashing: display automatic follow
LED 1: Fan power stage 1 ( low motor
+
LED 2: Fan power stage 2 ( average
+
LED 3: Fan power stage 3 ( high motor
+
LED 4: flashes Intensive level ( motor
+
LED F: Display filter saturation
red LED
OFF
-up time
(the hood automatically switches
down by one power level within a
short time until it is finally swit-
ched off)
power )
Press button right / button 2 of
the remote control once.
motor power )
Right button / Press button 2 of
the remote control twice
power )
Press button right / button 2 of
the remote control three times.
automatically switches back to
level 3 after 5 min )
Press the right button four times /
Press button 3 on the remote
control.
When the red LED lights up, the
metal filters must be cleaned
(see
section
"Cleaning
care").
The filter saturation indicator
lights up after max. 15 hours of
operation
(even when not cooking).
EN
and
15