Choosing The Site Of The Receiver; Wall Mounting - Ferroli MIDAS PC10 Manual Del Instalador

CHOOSING THE SITE OF THE RECEIVER

When the infrared remote control is used, it will also be necessary to
install a receiver that transmits the commands received by the actual
remote control to the conditioner.
The receiver must be positioned in an easily accessible place (if the
remote control breaks, the receiver can be used to select the main
functions).
Remember that the range of the remote control is about 8 meters and
that there must be no obstructions between it and the receiver.

WALL MOUNTING

Proceed as follows to wall-mount the appliance:
1.Fix the receiver to the wall using the wall plugs and screws provided.
Use the holes in the sides of the receiver to mark the drilling points on
the wall.
2.Plug the receiver connector into the connector on the cable from con-
nector CN1 on the control card.
3. Close the cover of the electrical connections box.
INSTALLATION
Cable supplied
Fig.1
Fig.2
Fig.3
25