Cleaning And Maintenance; Storage; Dismantling And Utilization - Sonel CMP-200 Manual De Uso

In order to replace the battery it is necessary to do the following:

place rotational selector in the position OFF and remove the
one rear Phillips head screw,

open the battery compartment and replace the required two
1.5 V AAA batteries,

re-assemble the tester.

7 Cleaning and maintenance

The casing of the tester may be cleaned with a soft, damp cloth
using all-purpose detergents. Do not use any solvents or cleaning
agents which might scratch the casing (powders, pastes, etc.).
The electronic system of the tester does not require maintenance.
8

Storage

In the case of storage of the device, the following recommenda-
tions must be observed:

Make sure the tester and its accessories are dry,

In the case the tester is to be stored for a prolonged period of
time, the battery must be removed from the device.

9 Dismantling and utilization

Worn-out electric and electronic equipment should be gathered
selectively, i.e. it must not be placed with waste of another kind.
Worn-out electronic equipment should be sent to a collection
point in accordance with the law of worn-out electric and electronic
equipment.
Before the equipment is sent to a collection point, do not dis-
mantle any elements.
Observe the local regulations concerning disposal of packages,
worn-out batteries and accumulators.
26
CMP-200 – USER MANUAL