Cleaning And Maintenance - Bestron DFA30 Manual Del Usuario

user's instructions
obtain a slightly downward, horizontal, or
slightly upward ow of air, tilt the fan housing to
the required angle.
3. Put the plug into the wall socket.
4. S witch on the fan by using the switches of one
of the three speeds:
a. Position 1, the fan operates at low speed.
b. Position 2, the fan operates at normal speed.
c. Position 3, the fan operates at high speed.
5. S top the fan by turning the rotary switch to
position '0'.
I t is inadvisable to expose people to a cold ow of
air for a long period of time (in particular, small
children and elderly people).

cleAnInG AnD MAIntenAnce

Over the course of time dust can accumulate between the spokes in the fan housing, and on the fan blades.
Always begin by trying to remove the dust with a brush and/or vacuum cleaner. If this does not remove all
the dust you can always dismantle the fan and clean it:
1. Remove the plug from the wall socket.
2. R elease the clips around the rim of the fan
housing.
3. U se a small crosshead screwdriver to remove
the crosshead screw at the bottom of the fan
housing.
4. Remove the front of the fan housing.
5. C lean the fan blades with a damp cloth. Dry
thoroughly with a dry cloth.
6. I f necessary, clean the motor housing with a dry
cloth or brush.
7. R eassemble the front of the fan housing. Make
sure that the fork on the fanhousing rim hooks
into the rim on the fixed half of the fan housing.
Also make sure that the holes for the crosshead
screw are in line with each other.
8. Fit the crosshead screw, and tighten it with a crosshead screwdriver.
9. C lose the clips around the rim of the fan housing, making sure that the front and back halves of the fan
housing are secured to each other along the entire circumference.
• Verify that the appliance is not connected to the power supply before you clean it.
• N ever use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
tHe enVIronMent
• D ispose of packaging material, such as plastic and boxes, in the appropriate waste containers.
• W hen this product reaches the end of its useful life do not dispose of it by putting it in a dustbin;
hand it in at a collection point for the reuse of electrical and electronic equipment. Please refer to the
symbols on the product, the user's instructions or the packaging.
• T he materials can be re-used as indicated. Your help in the re-use, recycling or other means of
making use of old electrical equipment will make an important contribution to the protection of the
environment.
• C ontact your municipality for the address of the appropriate collection point in your neighbourhood.
17