General Safety Rules - Berner BS 200 Manual De Usuario

English
Original Instructions
Your BERNER drill stand (X) is a device that must be used together with a suitable core
drill motor (Z) and a suitable anchoring system (Y), according to the directions given in
this user manual. These three elements (X+Y+Z) make a core drill that is suitable to drill
into stone-like materials (bricks, stone, concrete...), using a proper diamond core bit. Your
drill stand conforms with regulations related to core drills if used within the limits defined
in this user manual.
Warning! Ensure that every element of your core drill is suitable for the hole you
want to drill, in terms of drilling depth and diameter in relation with the material to
be drilled. If in doubt, consult your dealer.

General safety Rules

WARNING! Read the following safety instructions before
attempting to operate this product.
KEEP THESE INSTRUCTIONS!
Read the safety instructions provided by the
core drill motor manufacturer and by the
anchoring system
attempting to operate this product.
a) Keep work area clean. Cluttered areas and
benches can cause accidents.
b) Keep children away. Do not let children come into
contact with the tool or its attachments. Keep all
people away from the work area.
c) Dress properly. Do not wear loose clothing or
jewellery. They can be caught in moving parts.
Preferably wear rubber gloves and non-slip footwear
when working outdoors.
covering to keep long hair out of the way.
d) Wear safety goggles. Also use a face or dust mask
in case the operations produce dust or flying particles.
e) Beware of maximum sound pressure. Take
appropriate measures for the protection of hearing if the
sound pressure of 85 dB is exceeded.
Stay alert. Watch what you are doing. Use common
f)
sense. Do not operate the tool when you are tired.
g) Use appropriate tool. The intended use is laid down
in this instruction manual. Do not force small tools or
attachments to do the job of a heavy-duty tool. The
tool will do the job better and safer at the rate for
which fit was intended. The use of any accessory or
attachment or performance of any operation with this
tool, other than those
instruction manual may present a risk of personal
injury.
h) Have your Power Tool Attachment repaired by an
authorized BERNER repair agent.
07-2020
manufacturer before
Wear protective hair
recommended in this
Additional safety rules for diamond core drills
Always
wear safety
goggles
Always
wear safety
shoes
Instructions
Read carefully the data written on the Technical
Data sheet that you will find in the package
together with your product.
In the following text, figures are identified by numbers,
details inside the figures by letters. Figures are depicted on
the first pages of this user manual.
The drill stand
Your drill stand is made up of the following parts. Refer to
figures 2 and 3.
a base (A). This part allows you to fasten the drill
▪
stand on a surface. The following paragraph shows
different ways to fasten your drill stand;
▪ a column (B). The column is equipped with a rack
that allows the carriage movement;
a carriage (C). The carriage is the part of the drill
▪
stand that can move and to which you mount the
core drill motor. The feed handle (E) must be
mounted to the carriage in order to move it;
▪ two holding bars (D). They are designed to hold the
column, decreasing its vibration. The holding bars
can be optional in some rig stand types;
system for scaffold pipe fastening (F), available
▪
only for some rig stand types.
cerca centro – guida corona (G). Permette di
▪
stabilire con precisione il centro del foro e di
guidare la corona nelle fasi di inizio carotaggio.
Drill stand fastening
Warning: for your safety, make always sure
that the stand is securely fastened before
stating to drill.
Warning: always determine where the core
drill can drop off in case something goes wrong
with drilling. Do not stay in this area and do not
allow anybody to stay there. This is particularly
important when you are drilling overhead
(upward) or horizontally.
6
Always
Always wear
wear
ear
safety
protection
gloves
Always
wear dust
mask