Baxtran CHS Serie Manual De Usuario página 45

Press ENTER to confirm
Press ZERO to choose
Press ENTER to confirm
Press ZERO to choose
Press ENTER to confirm
Press ZERO to choose
Press ENTER Key to confirm
Press ENTER Key to confirm
Press ZERO to choose
Press ENTER Key to confirm
Press ZERO to set value, Press
to move digit
Press ENTER Key to confirm
Press ENTER Key to confirm
Press ZERO to choose
LL=2
LL=2
Un=0
Un=0
OFF 1
OFF 2
SP1
1 OFF
1 LO
02000
TARE
02000
SP 2
2 OFF
2 LO
New chS , the screen display LL=2, if
display calibrated value.
LL: filter parameter 0~5 total 6 options from smallest to biggest,
before calibration, set LL=0,after calibration, set LL=2 again,
generally choose LL=2 when ex-stock..
New chS, the screen display Un=0, if dyna-link calibrated, the
screen display calibrated unit.
choose unit, Un=0 kg, Un=1: lb, Un=2: N,
Un=3: KN, Un=4: ton,
generally, choose Un=0 when ex-stock
New chS , the screen display Off 1,if
chS calibrated, the screen display calibrated value
choose turn off method, 0~2 total 3 options:
0:turn off by hand,
1: if no operation, the screen display " - " after 15 minutes to save
power.
2: if no operation, the screen display " - " after 15 minutes and turn
automaticcaly after 60 minutes.
Generrally choose OFF=2 WhEN EX-STOCK.
Set point 1
New chS, the screen display 1 Off, if dyna-link calibrated, the screen
display calibrated value.
choose Set point 1 mode;
• 1 OFF means set point 1 no function.
1 LO
• is set point 1 lower.
• 1 HI is Set point 1 high.
New chS, the screen display 02000, if
screen display calibrated value.
Set "1 LO " or "1 HI " Value.
Set point 2
New chS, the screen display 2 Off, if
display calibrated value.
choose Set point 1 mode;
2 OFF
• means set point 2 no function.
2 LO is set point 1 low value.
•
• 2 HI is Set point 2.
USER MANUAL CHS En
chS calibrated, the screen
chS calibrated, the
chS calibrated, the screen
45