Tabla de contenido
Publicidad
TROUBLE SHOOTING GUIDE
This appliance was inspected thoroughly and was in good operating condition when it
was shipped from the factory. If a minor problem occurs, it usually can be solved quite
easily when the cause is found. Therefore, this checklist is provided for your
convenience.
PROBLEM
POSSIBLE CAUSE
1. Not properly plugged into
wall outlet.
2. No electricity in wall outlet.
Cleaner Won't
3. On/Off switch not turned
Run
on.
4. Motor thermostat tripped.
5. Blown fuse/tripped
breaker.
1.
Full or clogged dust cup.
2.
Wrong pile height setting.
3.
Clogged nozzle or dust
inlet port.
4.
Clogged hose.
Cleaner Won't
5.
Broken belt.
Pick Up
6.
Hose not inserted fully.
7.
Dirty filters.
8.
HEPA filter needs
cleaning or replacing.
9.
HEPA filter debris screen
needs cleaning.
Agitator Does
1.
Broken belt.
Not Turn
2.
Belt installed incorrectly.
1.
Rotating brush, turbine or
Air Driven
elbow obstructed.
Turbo Brush
2.
Belt broken.
Does Not
3.
Hose obstructed.
Rotate Or
4.
HEPA filter clogged.
Rotates
5.
HEPA filter debris screen
Slowly
clogged.
Air Flow
Restricted
1.
Attachment use restricts
With
air flow.
Attachment
2.
New carpet debris
clogging air path.
Use Sound
Changes
POSSIBLE SOLUTIONS
1.
Plug in firmly.
2.
Check fuse or breaker.
3.
Push on/off switch to on
4.
Reset motor thermostat.
5.
Reset circuit breaker or replace
fuse.
1.
Clean dust cup.
2.
Adjust setting.
3.
Remove obstruction.
4.
Remove obstruction.
5.
Replace belt.
6.
Push hose in securely.
7.
Clean / change filters
8.
Clean or replace HEPA Filter.
9.
Clean HEPA filter debris screen.
1.
Replace belt.
2.
Check belt changing and agitator
cleaning.
1. Clear obstructions.
2. Call 1-800-275-9251.
3. Clear obstruction.
4. Clean HEPA filter.
5. Clean HEPA filter debris screen.
1.
Check attachment.
2.
Remove obstruction.
10
FAMILIARISEZ-VOUS AVEC
VOTRE ASPIRATEUR-TRAÎNEAU
1. Bouton d'alimentation
2. Poignée
3. Bouton de rembobinage du cordon
4. Entrée d'air
5. Socle du cordon d'alimentation de
raccord du boyau
6. Bouton de relâche de la coupelle
7. Poignée de la coupelle à poussière
8. Filtre HEPA
9. Coupelle à poussière
10. Témoin du bec souffleur
11. Bec souffleur
12. Bouton On/Off du bec électrique
13. Tube télescopique
*Les illustrations peuvent différer du produit lui-même.
Spécifications techniques
Tension :
120 V, 60 Hz
Intensité :
12 A
14. Cordon d'alimentation du bec
souffleur
15. Socle du cordon d'alimentation du
bec souffleur
16. Bouton de relâche du boyau souple
17. Boyau souple
18. Cordon d'alimentation de raccord
du boyau
19. Suceur plat avec brosse
20. Brosse à meubles
21. Brosse à plancher
22. Brosse à épousseter
23. Électrobrosse pneumatique
24. Position d'arrêt
25. Cordon d'alimentation
26. Couvercle du filtre
27
Publicidad
Tabla de contenido
