Replacing The Lamp; Closing The Door; Technical Data; Installation - AEG SKZ81200F0 Manual De Instrucciones

Ocultar thumbs Ver también para SKZ81200F0:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Problem
Upper or lower square is
shown in the temperature
Display.
dEMo appears on the Dis-
play.

Replacing the lamp

The appliance is equipped with a longlife LED interior light.
Only service is allowed to replace the lighting device. Contact your Service Center

Closing the door

1.
Clean the door gaskets.
2.
If necessary, adjust the door. Refer to "Installation".
3.
If necessary, replace the defective door gaskets. Contact the Service Center.

TECHNICAL DATA

Dimension of the recess
Voltage
Frequency
The technical information are situated in the rating plate on the internal left side of the
appliance and in the energy label.

INSTALLATION

WARNING!
Read the "Safety Information" carefully for your safety and correct operation of the appli-
ance before installing the appliance.
Possible cause
An error has occurred in meas-
uring the temperature
The appliance is in demonstra-
tion mode (dEMo).
Height
Width
Depth
Technical data
Solution
Call your service representative
(the cooling system will continue
to keep food products cold, but
temperature adjustment will not
be possible).
Keep pressed approximately 10
sec. the OK button since a long
sound of buzzer is heard and the
Display shut off for a short while:
appliance start works regularly
1225 mm
560 mm
550 mm
230-240 V
50 Hz
17

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido