Beper BP.620 Manual De Instrucciones página 13

EN
Vacuum blender Use instructions
DESCRIPTION OF THE BLENDER FIG. A:
1. Air valve
2. Anti-splash cover
3. Lid of the jar
4. Jar
5. Blades
6. Motor housing
7. Cover for noise reduction with vacuum system
8. Pusher
9. Tube for vacuum
10. Connection for the vacuum tube to motor housing
11. Connection for the vacuum tube to accessories with air valve
DESCRIPTION OF THE TRAVEL CONTAINER FIG. B:
1. Air valve
2. Safety ring = to stop the upper part of the cover
3. Cap opening button
4. Travel container lid
5. Air valve
6. Transparent vacuum stopper
7. Lid with vacuum valve and date indicator
DESCRIPTION OF THE COFFEE GRINDER FIG. C
1. Container
2. Blades
CONTROL PANNEL FIG. D
1. ON/OFF Button
2. VACUUM AND BLEND Button
3. SMOOTHIE Button
4. LOW SPEED Button
5. HIGH SPEED Button
6. PULSE Button
BUTTON 1:
ON After placing the jar complete with lid, and connecting the power cord to the electrical outlet you will hear 6
intermittent beeps and all the display lights will flash 6 times, while the ON/OFF button light will remain on, at this
point the machine enters standby mode. Keep the ON/OFF button pressed for a long time, until all the lights will
steadily light, at this point it will be possible to select the desired function.
OFF: To switch off the appliance press the ON/OFF button for about 3 seconds.
BUTTON 2 =VACUUM AND BLEND: To obtain the vacuum shake you need to insert the noise reduction cover.
By selecting this function, the appliance will automatically activate the vacuum and then blend at short intervals
of time. The shake will be ready when it appears on the scree the write END. The process can be interrupted at
any time by keeping pressed the ON/OFF button.
BUTTON 3 =SMOOTHIE: By selecting this function the appliance will not activate the vacuum but the food will
be intermittently blended for 5 cycles. The process can be interrupted at any time by keeping pressed the ON/
OFF button.
SPEED SELECTION -/+
BUTTON 4 = LOW SPEED: By selecting this function the appliance will start operating at minimum speed, then
stop after 3 minutes of continuous working. The process can be interrupted at any time by keeping pressed the
ON/OFF button.
BUTTON 5 = HIGH SPEED: By selecting this function the appliance will start operating at maximum speed, then
stop after 3 minutes of continuous working. The process can be interrupted at any time by keeping pressed the
ON/OFF button.
BUTTON 6 = PULSE: To activate this function, long press the button, release the button to stop the operation.
The appliance is set to operate continuously for 60 seconds.
13