Accessmatic Fox 1000 C Manual De Usuario página 61

1000 P
RO
Opening your life
1000 P
RO
1000 P
RO
Increase
time
Opening your life
1000 P
RO
Decrease
time
1000 P
RO
4. AUTOMATIC CLOSING AND TIME SETTING
NOTE: We recommend using Security Photo Beams in any installation where the
automatic shutdown feature is enabled.
a) Hold down the SET button until "1" appears on the display, then press the UP
button until "4" appears on the display to enter this setup function, and then
release the button.
b) Press the SET button again, the unit is now in the auto close setting mode and
Opening your life
a "0" gure will be displayed with a ashing dot on the screen.
c) Press the UP / DOWN button once to set the automatic closing time (0 ~ 9).
Press the UP button to increase the number, or the DOWN button to decrease the
number. The closing time is 15 seconds * N, N = 0 ~ 9, the maximum time is 135s.
To disable the automatic closing function, set the time to zero (0).
d) Press the SET button to con rm the setting, it will automatically return to the
standby state and an "II" will be displayed.
NOTE:
1. The closing time is set to "0" as the factory standard.
Opening your life
2. If the photocell function is activated, and interrupted by obstructions, the
automatic closing time will stop for a moment, and will continue again with the
automatic closing time.
Opening your life
20