Roadstar RU-275 Manual De Instrucciones página 4

1 English
LOCATION OF CONTROLS
1. POWER / SOURCE BUTTON
2. SKIP - / TUNE -
3. SKIP + / TUNE +
4. VOLUME - / ALARM 1
5. VOLUME + / ALARM 2
6. TIME / MEM / PLAY MODE
7. PLAY-PAUSE
8. STOP
9. SNOOZE
10. USB PORT
11. SD CARD SOCKET
12. AUX-IN SOCKET
13. HEADPHONES OUT
14. ANTENNA
15. AC PLUG
16. BATTERY COMPARTMENT
PRECAUTION

INSTRUCTIONS - All the safety and operating instructions should be read before the
radio is operated. The manual should be retained for future reference.

HEED WARNINGS - All warnings on the appliance and in the operating instructions
should be adhered to.

WATER AND MOISTURE - The appliance should not be used near liquids or in rooms
with a high level of humidity.

VENTILATION - The appliance should be situated so that its location or position does
not interfere with its proper ventilation.

HEAT - The appliance should be situated away from heat sources such as radiators,
stoves or other appliances that produce heat.

POWER SOURCE - The radio should be connected to power supply only of the type
described in the operating instructions or as marked on the appliance.

POWER CORD PROTECTION - Power supply cords should be routed so that they are
not likely to be walked on or pinched by items placed upon/against them.

OBJECT AND LIQUID ENTRY - Care should be taken so that objects do not fall and
liquids are not spilled into the enclosure through openings.

DAMAGE REQUIRING SERVICE
The appliance should be serviced by qualified service personnel when:
- The power supply cord or plug has been damaged;
- Objects have fallen into or liquids has been spilled into the radio;
- The appliance has been exposed to rain;
- The appliance has been dropped or the enclosure damaged;
- The appliance does not appear to operate normally.

SERVICING - The user should not attempt to service the appliance beyond that descri-
ve in the user operating instructions. All the servicing should be referred to qualified
service personnel
Note: If the display does not function properly or no reaction to operation of any con-
trol may due to the electrostatic discharge. Switch off and disconnect the AC cord and remo-
ve all the batteries, then turn the power back on after a few seconds.