Roadstar RU-275 Manual De Instrucciones página 5

POWER SOURCES
AC POWER: You can power your portable stereo system by plugging the AC po-
wer cord into the AC plug (15) at the back of the unit and into a wall AC power outlet.
Check that the rated voltage of your appliance matches your local voltage.
Make sure that the AC power cord is fully inserted into the appliance.
POWER: To use the radio with batteries, disconnect the AC power cord
BATTERY
and insert 6 × "LR14" batteries into the compartment (16).
Be sure that the batteries are inserted correctly to avoid damage to the appliance.
Remove the batteries when the radio will not be used for a long period of time, as this
will cause leakage to the batteries and subsequently damage to your radio.
CLOCK SETTING
In stand-by mode:
1. Press and hold the [TIME] button (6) until the display shows "12/24 Hr";
2. Press the [SKIP -/+] buttons (2/3) to choose 12 or 24 hour format;
3. Confirm with the [TIME] button (6);
4. Press the [SKIP -/+] buttons (2/3) to adjust the hour;
5. Confirm with the [TIME] button (6);
6. Press the [SKIP -/+] buttons (2/3) to adjust the minutes;
7. Confirm with the [TIME] button (6).
ALARM SETTING
In stand-by mode:
1. Press and hold the [ALARM 1] button (4) to enter into the Alarm setting.
2. Press the [SKIP -/+] buttons (2/3) to adjust the hour;
3. Confirm with the [ALARM 1] button (4);
4. Press the [SKIP -/+] buttons (2/3) to adjust the minutes;
5. Confirm with the [ALARM 1] button (4);
6. Press the [SKIP -/+] buttons (2/3) to choose the alarm mode (Buzzer, FM, USB
or OFF);
7. Confirm with the [ALARM 1] button (4);
8. Press the [SKIP -/+] buttons (2/3) to adjust the volume;
9. Confirm with the [ALARM 1] button (4).
To set the second Alarm, repeat all steps with [ALARM 2] (5) instead of [ALARM 1].
ALARM OFF:
During Alarm on, press [ALARM 1 or 2] button (4/5) to deactivate the alarm sound
(the Alarm setting remains) or press [SNOOZE] button (9) to postpone the alarm for 9
minutes.
DEACTIVATE ALARM SETTINGS:
To remove alarm settings, at step n° 6 select "OFF".
SLEEP TIMER
The sleep timer switches the radio off automatically after an adjustable time.
When the radio is ON:
1. Press and hold [SLEEP] (8) to access to the "SLEEP TIMER" menu;
English 2