Temperature Regulation; Cleaning Tools; Machine Defrosting - Enofrigo GRACE 2 Manual De Instrucciones

Edit main compartment temperature set-point
1. Push Set button to display stored value.
2. Edit the value pressing ▲ e ▼.
3. Confirm new value by press Set.
Manual defrosting
1. Keep pushing DEF ▼ button more than 5 seconds.,
Defrost duration (measured in minutes)
1. Keep pushing PRG button more than 5 seconds.,
2. Search parameter F4 by press ▲ e ▼.
3. Push Set button to display stored value.
4. Edit the value pressing ▲ e ▼.
5. Push Set button.
6. Confirm new value by press Prg more than 5 seconds.
Reset electronic control to the factory setting in case of trouble.
1. Unplug the power cord.
2. Keep pushing Prg button.
3. While pushing Prg, plug the power cord and wait a few
seconds till the display shows code bn0.
4. Search parameter bnX by press ▲ e ▼, where X reports
the model as shown in the following table.
5. Push Set button.
The termoregulator instructions are inside the booklet about the usage of it.

12.3 Temperature regulation

For correct operation of the machine and optimal drink storage, we suggest to set "set point" of the
thermostat as it follows:
REGULATION

CLEANING TOOLS

Clean all the machine parts using a cloth soaked in warm water and neutral detergent; never use abrasive
powder or detergents that could damage the system internally or externally, especially the glass or
polycarbonate parts.
• Rinse and dry with a soft

13. MACHINE DEFROSTING

The formation of frost on the container walls is normal.
The quantity and speed of accumulation vary according to ambient conditions and how often the doors are
opened.
Auomatic defrosting is set by default on all the model types .
In the event of the evaporator becoming clogged with ice, proceed as follows:
Keep pushing DEF ▼ button more than 5 seconds.
24
Thermoregulator "set point" for
white wine
.
cloth.
+5 °C
CT81900001
Thermoregulator "set point" for red
wine
+18 °C
Rev.01 – 07/13