remote control
Remote Control arrives paired to the adjustable base. Three (3) AAA batteries are required to operate
the remote.
* Not user programmable.
‡ Can be reprogrammed to user desired position.
The ZERO-G
, TV in Bed, Anti-Snore, and Favorite 1 in bed
®
presets can be re-programmed to any position chosen by the
user. Simply adjust the bed to the desired position, then hold
any of the 4 buttons down until the remote backlight flashes
twice. The button is now re-programmed.
To restore the buttons to their original positions, depress the
One-touch Flat and Zero-G
seconds. The remote backlight will flash twice to indicate the
original positions have been restored.
PRESET
Zero G
Adjusts your legs to relieve pressure off the lower
back.
Flat *
One-Touch Flat lowers head and foot to flat
position and turns off massage (if running).
TV in Bed Preset Position ‡
Brings head and foot into position for viewing TV.
Anti-Snore Preset Position ‡
Raises the head of the bed slightly to help open
airways.
Favorite 1 Preset Position ‡
Reprogrammable Preset Position.
Underbed LED lighting *
Turn on/off underbed LED lighting.
8
buttons simultaneously for 5
®
‡
®
TANDEM MODE (for Twin XL/Split CA King x 2 bases only)
Immediately after installation, the bases will operate in unison. In
order to have both bases operate independently, either download
the Tempur-Pedic Sleeptracker app and enable the split system
setting during setup, or use the remote control to turn Tandem
Mode off.
To turn Tandem Mode off, press and hold FLAT + Favorite 1 Preset
for six (6) seconds. Remote backlight will flash twice. Tandem
Mode is now off and both bases will operate independently.
To turn Tandem Mode on, press and hold FLAT + TV In Bed Preset
for six (6) seconds. Remote backlight will flash twice. Tandem
Mode is now on and both bases will operate in unison. This is the
factory setting.
Child Lock Feature
Activate Child Lock
Press and hold the HEAD UP and FOOT UP buttons
together for 3 seconds until the remote backlight
flashes twice.
The remote is now in Child Lock. Pressing any
buttons while in Child Lock will yield no movement
to your adjustable base.
Deactivate Child Lock
Press and hold the HEAD DOWN and FOOT DOWN
buttons together for three (3) seconds, then hold
HEAD UP and FOOT UP for three (3) seconds until
the remote backlight flashes twice.
The remote is no longer in Child Lock. The remote
and adjustable base will work normally.