Amica PMG2.0ZpZtR Manual De Instrucciones página 35

INSTALLATION
• prepare opening in the worktop with dimensions shown on the assembly drawing (Figure),
• connect the hob to a gas and electrical system in accordance with the instructions supplied,
• loosely attach fixing brackets to the bottom of the hob
• remove the paper tape protecting the double sided adhesive seal applied to the edge of
the hob flange,
• remove dust from the worktop, insert hob into the opening and press in firmly,
• position fixing brackets perpendicularly to the hob's edge and tighten firmly.
Fig.
Seal
Fig.
Worktop
Hob
Screw
Fixing bracket
35