Roadstar HIF-1937TUMPK Manual De Instrucciones página 7

Repeat play: you can listen the desired tracks or folder repeatedly by this

function.
Random play: you can listen all the tracks or folder in a random order by

this function
CD DISC PROGRAMMING
Up to 99 tacks can be programmed for mp3 (20 in CD) and play in any or-
der. before use, be sure the system is at stop mode before programming:
1. Press cd/usb mode & stop the cd playback.
2. Press the "PLAY MODE" button, " P " will appear on lcd display (18).
Moreover, it will indicate program no. and digits for track no. to be pro-
grammed.
3. Select a desired track by pressing skip or buttons (3).
4. Press the " PLAY MODE " button to store the trace into memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory if ne-
cessary.
6. When all the desired tracks have been programmed, press cd " play/
pause (2) to play the disc in assigned order.
7. To cancel the programmed file, press "stop" button.
PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA
The system is able to decode and playback all mp3 /wma file which stored
in the memory media with usb connecting port.
1. Set function selector (15) at cd/usb mode and then press FUNCTION
button (6) to select usb.
2. Plug-in the usb plug with the face up & make sure it going into comple-
tely.
3. The system will start reading the storage media automatically after con-
necting, and lcd display (18) will show the total number of mp3/wma files
4. Repeat the same playback procedure as playing cd/mp3 disc as above.
English 7 8 English
REMARKS:
The system can detect and read the file under mp3 and wma format only

though the usb port.
If connect the system to mp3 player via the usb socket, due to variances

in mp3 encoding format, some mp3 player may not be able to play via
the usb socket. this is not a maul-function of the system.
Connecting the usb upside down or backwards could damage the audio

system or the storage media (usb thumb drive). Check to be sure the
direction is correct before connection.
LISTENING TO TAPE
1. Set the Function button (6) to " TAPE " mode. The system will start play-
back automatically after inserting the cassette tape.
2. Press " TAPE FORWARD / EJECT " Button (33) half inwards during
playback mode. The tape will wind forward.
3. Slightly press the " TAPE FORWARD / EJECT " Button (33) again to
resume playback.
4. Press the" TAPE FORWARD / EJECT " Button (33) completely inwards
and the cassette tape will be ejected through the cassette door cover
(34).
ENCODING OF CD/PHONO INTO MP3 FILE
The system is able to encode normal cd, cassette or turntable to mp3 for-
mat and recording at memory media with usb connecting port.
CD ENCODING
Encoding 1 track:
1. Perform normal playback of the cd track you want to encode & record,
2. Press " record " button (9) twice during the playback of the desire track,
unit will display. Encoding is performing now.
3. Press the STOP button to finish recording the track.