Loading Paper - Olivetti LOGOS 902 Instrucciones De Uso

Transport safety device removal
Before plugging in the AC cord and switching on the calculator, check that the rated
voltage indicated on the rating label on the bottom corresponds to the local voltage, and
remove the ribbon-cushion placed over the ribbon spool.
Ribbon cushion is located under the
printer cover.
Replacing ribbon spool
1. Remove printer cover.
2. Move spool holder to remove both spools.
3. Insert new spools, making sure that black
side of ribbon is face up, that the ribbon is
threaded through the ribbon guide, and
that it winds in the right direction.

Loading paper

1. Plug in the calculator and turn it on.
2. Cut, or tear evenly, the end of the
paper roll to get a straight, even edge
for proper feeding under the print
head.
3. Holding the paper roll in one hand,
feed the paper from the bottom of
the roll and insert it the paper slot at
the back of the calculator.
4. Press paper feed key until the paper catches and advances through the printer.
5. Fit the paper roll between the pair of paper holders.
ENGLISH
Correct
Pull from here
Incorrect
1