Connect to the mains. It will be displayed on
•
the screen 12:00.
Press ON/OFF button, the red (RUN) indicator
•
is ON.
The coffee will start to come out in a few
•
seconds.
The jug (F) can be removed while the coffee
•
is being made. The antidrip system prevents
the coffee from driping when the jug is not in
position. However, time can not exceed 30
seconds, otherwise the filter may overflow from
the edge of funnel
When you finish making coffee, you can stop
•
the machine
If you would like to stop the machine, press
•
ON/OFF twice, and the machine will stop.
If not, the coffeemaker will automatically switch
•
to Keep Warm and after 40 minutes, the coffee
machine will switch off automatically.
TO MAKE PROGRAMMING COFFEE
Set the clock and Schedule automatic startup
•
First you have to set the clock.
•
Previously you must press ON / OFF twice and
•
the blue light turns on.
Press the PROG button.
•
CLOCK appears on the LCD screen. Press the
•
HOUR key and the MIN key to determine the
current time, between 0:00 and 23:59.
Press the PROG button again.
•
After setting the time, when you release the
•
buttons, in 8 seconds, the screen will return to
clock automatically.
TIMER appears in the LCD Screen, press
•
the HOUR key and the MIN key to set the
automatic start time, between 0:00 and 23:59.
The digits on the LCD screen will flash for 15
•
seconds. When they stop blinking, the time will
be set.
Press the ON / OFF key once.
•
The red light (RUN) is ON, it is in a state of
•
making coffee directly. Coffee starts coming
out in a few seconds.
If you press the ON / OFF button twice.
•
With the blue light (AUTO) on, the coffee
•
machine enters automatic preparation status.
The machine will start making coffee when the
reserved time arrive with red light (RUN) ON .
If you press the ON / OFF key 3 times, the set
•
program will be cancelled. The coffee machine
will be on normal standby status.
When the machine is making coffee, Press
•
ON/OFF twice to Stop.
WARNING: Do not leave the coffee machine
•
unattended while making coffee.
ONCE THE APPLIANCE IS FINISHED,
Stop the appliance.
•
You can press ON/OFF to stop, or you can just
•
leave it and it will turn off automatically after
35 minutes.
Unplug the appliance from the main.
•
Clean the device.
•
CLEANING
Disconnect the appliance from the mains and
•
allow it to cool before undertaking any cleaning
task.
Clean the equipment with a damp cloth with
•
a few drops of washingup liquid and then dry.
Do not use solvents, or products with an acid or
•
base pH such as bleach, or abrasive products,
for cleaning the appliance.
If the appliance is not in good condition of
•
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance's
useful life and could become unsafe to use.
To clean the permanent filter, empty it and
•
rinse it with running water.
The following pieces may be washed in a
•
dishwasher (using a soft cleaning program):
- Jug.
Then dry all parts before its assembly and
•
storage.
HOW TO DEAL WITH LIME SCALE
INCRUSTATIONS:
For the appliance to work correctly it should
•
be kept free of limescale or magnesium
incrustations caused by the use of hard water.
A specific antilime scale product should be
•
used on this kind of product.
EN