Working Modes - Orbegozo PC 1016 Manual De Instrucciones

PC 1016
TO INSTALL OR REPLACE BATTERY
The battery type of scale depends on the product structure. Find
the battery type of your scale according to the following pictures,
then install and replace battery as described included).
1 x 3V CR2032 lithium batteries. Remove isolation sheet before use;
LCD
1. Zero weight
2. Tare Weight
3. Negative Value
4. Working
modes(weight/water/milk)

WORKING MODES

1. Weight mode
2. Milk volume mode
3. Water volume mode.
UNIT CONVERSION BUTTON
Open the battery case cover at the bottom of scale:
A. Take out the used battery with the aid of a
object, as shown in picture.
B. Install new battery by putting one side of the
battery beneath
pressing down the other side.
At the bottom of scale, you can find a unit
button as shown in picture.
the battery
5. Weight unit (lb:oz)
6. Weight unit (gr)
7. Volume unit (ml)
8. Volume unit (fl'oz)
baffle and then
conversion
16