FONESTAR AIP-1020 Manual De Usuario página 6

EN
AIP-1020 OPERATING STATUS
The LED blue and red indicators represent the current system status. These indications start to work when
the AIP-1020 microphone is switched on. Below is a description of all the operating status according to the
LED indicators located on the front panel of the device:
ZONE SELECTION BUTTONS
Permanently lit in blue.
Permanently lit in red.
Permanently off.
Emits blue and red flashing light.
Emits red flashing light.
AUDIO SELECTION BUTTONS
Permanently lit in blue.
Permanently lit in red.
Permanently off.
The 4 buttons emit flashing red light
simultaneously.
STATUS BAR
Emits red flashing light.
Permanently lit in red and the rest of the
buttons off.
TALK BUTTON
Permanently off.
Permanently lit in blue.
Permanently lit in red.
Button with associated receivers.
Selected button.
Button without associated receivers.
At least one of the AIP receivers associated with the
button is not found on the network.
None of the AIP receivers associated with the button are
found on the network.
Button with audio message available.
Selected audio message.
Button with audio message available.
Problem with the AIP-1020 internal memory.
For 30 seconds in the start-up and during playback of
an audio or voice message.
The AIP-1020 device does not have a network
connection.
None of the zone buttons have been selected.
One or several zones have been selected.
An audio or voice message is being played.
- 6 -
STATUS
STATUS
STATUS
STATUS