English
WARNING
The MultiTool continues to rotate for a
short period after the throttle trigger is
released (flywheel effect).
If the MultiTool or deflector becomes
clogged or stuck, always switch off the
engine and make sure the attachment
has stopped before cleaning. Grass,
moss, weeds, etc. should be cleaned off
the attachment as necessary.
5m (16ft)
To reduce the risk of eye and other injury
ensure that bystanders are at least
16 feet (5 m) away. Bystanders should
be encouraged to wear eye protection.
To reduce the risk of damage to
property, also maintain this distance
from such objects as vehicles or
windows.
Stop the engine immediately if you are
approached.
WARNING
Before you start work, examine the area
for stones, glass, pieces of metal,
rubbish or other solid objects. Such
objects may also damage the MultiTool.
Do not use the dethatcher MultiTool on
gravel surfaces.
8
WARNING
Never divert discharge of material
toward bystanders nor allow anyone
near the area of operation. Use care in
directing discharge to avoid damage to
surfaces, automobiles, and the like.
WARNING
During work, check the tightness and the
condition of the MutiTool at regular
intervals with the engine and attachment
stopped. If the behavior of the
attachment changes during use, stop
the engine immediately and check the
attachment for cracks, wear and
damage. Replace bent, worn or
damaged attachments immediately.
Such attachments may shatter at high
speed and cause serious or fatal injury.
WARNING
The gearbox becomes hot during
operation. To reduce the risk of burn
injury, do not touch the gear housing
when it is hot.
MAINTENANCE, REPAIR AND
STORING
WARNING
Always stop the engine and make sure
that the attachment is stopped before
doing any maintenance or repair work or
cleaning the power tool. Do not attempt
any maintenance or repair work not
described in your MultiEngine and
MultiTool instruction manuals. Have
such work performed at your STIHL
servicing dealer only.
WARNING
Use only identical STIHL replacement
parts for maintenance and repair. Use of
non-STIHL parts may cause serious or
fatal injury.
WARNING
Never repair damaged attachments by
welding, straightening or modifying the
shape. This may cause parts of the
attachment to come off and result in
serious or fatal injuries.
Tighten all nuts, bolts and screws,
except the carburetor adjustment
screws, after each use.
Do not clean your machine with a
pressure washer. The solid jet of water
may damage parts of the machine.
Store the power tool in a dry and high or
locked location out of reach of children.
MF-MM