Technical Data; Box Contents - Greencut LJ400C Manual De Instrucciones

TECHNICAL DATA

Nominal input voltage
Power
Disc diameter
Belt Size
Table size
Belt inclination
Tilting disc table
Belt speed
Speed
Sound power level
Weight
NOTE: GREENCUT reserves the right to modify the technical data without prior notice.

BOX CONTENTS

1. Belt sander (1 pc.)
2. Hexagonal key S=6 (1 pc.)
3. Hexagonal screw M8*16 and flat washer D8 (2 pcs.)
4. Support for sanding belt (1 pc.)
5. Miter gauge assembly (1 set)
6. Disc working table (1 pc.)
7. Locking handle (1 pc.)
8. Large flat washer (1 pc.)
• Remove the product and accessories from the box. Make sure all items are present.
• Inspect the product to ensure that it has not been broken or damaged in transit.
• Do not discard the packaging material until you have carefully inspected and satisfactorily used the product.
ATTENTION: If any part is missing or damaged, please contact the Official Technical Service. Do not
use this product without replacing the part. Using this product with damaged or missing parts can
cause serious injury to the operator.
BELT SANDER
240V ~ 50 Hz
400W
150mm
914x100mm
226x160mm
0-90º
0º-45º
7,35m/s
2980rpm
Without load: 88.7dB / With load: 89.4dB
16Kg
53
EN