Publicidad
Idiomas disponibles
Idiomas disponibles
Pipelines
Electrical connection (only for models with electrical cabinet)
ATTENTION:
• This equipment cannot be connected to a simple plug.
• This equipment needs an electrical suitable installation. This one must be done by
an specialized person following the electrical regulation for safety in every country.
• The electrical feeding must be protected always by a high sensibility differential.
• It is indispensable to realize an electrical landing.
• Use a wire with addapted section to the power of the equipment and to the distance
of the electrical cabinet.
4. Start up
Be sure that the equipment is turned off during the manipulation of any valve and also
ensure all the fittings.
Follow the pump and filter instructions of functioning of the pump and the filter included,
with the equipment.
Filling of the filter
• Open the filter and fill it with water up to the half.
• Protect the diffuser in order to protect it from the sand.
• To refill the filter with sand of sílex with 0'4-0'8 grain or zeolites (they are not
included), according to the following table:
RETURN
DRAINING
Publicidad
