Features; Mattress Features; Control Unit Features - Joerns P.R.O. Matt Plus Manual De Servicio

Joerns® Support Surfaces
P.R.O. Matt® Plus

Features

Mattress Features

• Four-zone (head, shoulder, torso, and foot) dynamic
pressure redistribution profile with 15 cell internal
design that automatically adjusts to each patient's
body profile and weight (Figure 1)
• The head zone remains static and is comprised of
high density foam for maximum patient comfort while
the shoulder, torso, and foot zones are optimized
independently to maximize pressure redistribution
• Dynamic, non-powered mattress easily converts
to alternating and powered modes with connected
control unit (PMP-CU)
• Automatic re-inflation of air zones through P.R.O.
Technology after patient removal - no adjustment or
®
manual inflation required
• Viscoelastic one-inch foam topper provides
maximum pressure redistribution, patient support,
and increased comfort
• Integrated foot zone helps to protect delicate
heel area
• The surrounding firm perimeter provides stability
during patient care and transfer and helps support
patient safety
• Five-inch deep internal cells are specially designed
for automatic re-inflation without the use of a
powered system
• Therapy cover is constructed of a breathable,
non-plasticizing/moisture-proof nylon and aids in the
prevention of friction and shearing. Optional stretch
cover available.
• Scratch-resistant rubber backing
• Internal non-kinking hose sets
• Top cover is stain and odor resistant and is treated
with a highly effective bacteriostatic agent to inhibit
the growth of bacteria and fungus
• Internal fully enclosed fire barrier meets BFD IX-11
and 16CFR Part1633 flammability standards
• 500 lb* SWL
*Mattress weight capacity only; total weight must not exceed bed
frame manufacturer's specified load capacity.
6
© 2020 Joerns Healthcare • 6110394 RevC • 20-2539

Control Unit Features

• Three modes of operation: Autofirm, Therapy, and
Alternate
• Autofirm mode provides maximum air inflation
designed to assist both patients and caregivers
during patient care and transport
• Autofirm safety feature automatically returns to
Therapy mode after approximately fifteen minutes in
the Autofirm mode
• Therapy mode is a static pressure redistribution
mode
• Alternate mode alternates the air pressure in
adjacent cells throughout the mattress (excluding the
head section)
• Four alternating pressure cycle times: 5, 10,
15, and 20 minutes
• Five Comfort Adjust settings provide the ability to
increase or decrease the general firmness of the
P.R.O. Matt Plus mattress
• Quick disconnect hoses allow easy setup and CPR
release
• Compact lightweight control unit is quiet and energy
efficient
• Crisp, easy-to-read graphics for intuitive setup and
therapy control
Figure 1
English