Environment Protection; Control Panel - AEG SCT81900S0 Manual De Instrucciones

• The appliance must not be located
close to radiators or cookers.
• Make sure that the mains plug is ac-
cessible after the installation of the ap-
pliance.
• Connect to potable water supply only
(If a water connection is foreseen).
1.6 Service
• Any electrical work required to do the
servicing of the appliance should be
carried out by a qualified electrician or
competent person.
• This product must be serviced by an
authorized Service Centre, and only
genuine spare parts must be used.

1.7 Environment Protection

This appliance does not contain
gasses which could damage the

2. CONTROL PANEL

1 2
Fridge Pilot light
1
Fridge ON/OFF switch
2
Fridge temperature regulator, + but-
3
ton
Fridge temperature indicator
4
Fridge temperature regulator, - but-
5
ton
DYNAMICAIR indicator
6
DYNAMICAIR button
7
Appliance Pilot light
8
Appliance ON/OFF switch
9
Freezer temperature regulator, +
10
button
Freezer temperature indicator
11
Freezer temperature regulator, -
12
button
3 4 5 6 7 8 9 10
FROSTMATIC indicator
13
FROSTMATIC button
14
Alarm indicator
15
Alarm reset button
16
2.1 Switching on
1. Insert the plug into the mains sock-
et.
2. Press ON/OFF switch .
3. The Pilot Light will light up.
4. The alarm indicator light flashes
since the temperature is reached.
The acoustic alarm sounds.
5. Press the alarm reset button to reset
the alarm.
ENGLISH
ozone layer, in either its refriger-
ant circuit or insulation materials.
The appliance shall not be dis-
carded together with the urban
refuse and rubbish. The insula-
tion foam contains flammable
gases: the appliance shall be dis-
posed according to the applica-
ble regulations to obtain from
your local authorities. Avoid
damaging the cooling unit, espe-
cially at the rear near the heat ex-
changer. The materials used on
this appliance marked by the
symbol are recyclable.
11 12 13 14 15 16
5