Technical Specification - PIXO C2+ Manual De Instrucciones

Instruction manual
PIXO C2+ Universal Charger
Congratulations on purchasing the Pixo C2+! You can charge the following
batteries with this universal charger:
All* 3.6-3.7 V or 7.2-7.4 V Li-Ion Battery Packs from Digital Cameras and
Camcorders
*The following battery packs cannot be charged:
Battery packs which communicate with the camera or the original charger.
For example Canon BP-809, BP-819, BP-827 or Canon LP-E6. Battery packs
with different voltage. For example CR-V3 und CR123A with 3V or Nikon
EN-EL4 with 11.1V. Battery packs with special contacts. For example
Koyocera BP-800/1000 or Leica M8.
Please visit www.pixo.de for up-to-date information
1-2 NiMH / NiCd 1.2 V AA Mignon or AAA Micro Rechargeable Batteries
Li-Ion / Li-Po Batteries in Mobile Phones, PDAs, mp3 Players and Car Navi-
gation Systems

Technical specification

Li-Ion charge function
• Unique snap-in support and contact method without additional adapter
plates
• Special microcontroller to control and supervise all charge processes
• Short circuit protection with automatic polarity and voltage detection
• Smart Vmax pulse charge with faulty battery pack detection
• Top-up charging phase with over charge protection and 11 hours safety
timer
• Battery Activator function for deep discharged Li-Ion batteries
• Charging time minimum of one hour depending on battery charge status
and capacity
• Li-Ion charge output rating: 4.2-8.4 VDC ~700 mA