Environmental Protection - Skil 9071 Manual De Instrucciones

Operating instructions
INSTRUCTION FOR USE
Warning:
Adjust the speed according to the material to
be polished.
This machine should not be used in marble,
granite, etc.
POLISHING
Support the polishing wool bonnet fully on the surface to be
polished and move it evenly by sections. Remember that
one move should overlop the previous one by one half. Do
not stop in a single spot to avoid burning the painting. Do
not move the machine in circles to avoid staining or burning
the paint.
Warning - In polishing operations, start the service with the
speed selector C in position 1 (lower speed) and then it the
service to be conducted requires higher speed, adjust to
position.
Maintenance
Before any work on the machine itself, pull the
mains plug.
For safe and proper working, always keep the machine and
the ventilation slots clean.
If the machine should fail despite the rigorous
manufacturing and testing procedures, repair should be
carried out by an authorized customer services center for
SKIL power tools.
SKIL_IB9071_BR.indd 14
Guarantee
We guarantee SKIL appliances in accordance with
Statutory/country-specific regulations (proof of purchase by
invoice or delivery note).
Damage attributable to normal wear and tear, overload or
improper handling will be excluded from the guarantee.
In case of complaint please send the machine,
undismantled, to your dealer or the SKIL Service Center
for Electric Power Tools.
Warning!
Freight and insurance costs are charged to the client, even
for warranty claims.

Environmental protection

The machine, accessories and
packaging should be sorted for
environmental-friendly recycling.
If you discard your machine, accessories,
do not put off in the trash, please give it to
a technical service Skil. It will provide a
better destination according the politics of preservation of
the environment, recycling parts according
the local laws.
Subject to change without notice
14
30-3-2011 16:04:41