Maintenance And Care Of The System - Nussbaum JUMBO LIFT 3500 NT Instrucciones De Servicio

Any kind of external leakage is not
permitted and must immediately tak-
en care of. This is absolutely neces-
sary especially before an emergency
discharge.
Reason which make an emergency discharge
necessary are for example, electrical blackout, for
errors in the lowering valves, etc.
1. Switch off the main switch (2).
2. Loosen and remove the front unit covers (1).
3. Unscrew the pins of valves V1 and V2 counter-
clockwise.
2
13
14
2 Main switch
13 Valve V1
4. The lowering process starts immediately.
5. The entire lowering process must continuously be
observed. Observe the reaction of the vehicle.
6. Lower the vehicle to the lowest position.
7. Screw the pins of valves V1 and V2 back in com-
pletely.
7

Maintenance and care of the system

Before maintenance, do all prepa-
ration work so there is no danger to
life or limb or object damage during
maintenance and repair work.
Value is placed on long lifetimes and safety in the
development and production of Nussbaum prod-
ucts. To guarantee the safety of the operator, prod-
uct reliability, low running costs, keep the warranty
and also the long-lifetime of the product, proper
set up and operation is just as important as regular
maintenance and sufficient care.
The lift system is to be serviced at regular intervals
according to the following plan. For intensive oper-
ation and higher degree of contamination shorten
the service interval.
The complete function of the lift system is to be ob-
served during daily use. Customer service must be
informed of any malfunctions or leaks.
OPI_JUMBO LIFT 3500 NT_V3.1_DE-EN-FR-ES-IT
5
5 Oil filling opening
14 Valve V2
To simplify maintenance work, follow instructions on
the maintenance sticker that is found somewhere
on the unit, depending on the lift design.
002
73