Test Mode; Auto Test; Manual Test; System Information - Chauvet Professional MAVERICK MK1 SPOT Manual De Usuario

Operation

Test Mode

Auto test

To perform an auto test of the Maverick MK1 Spot functions, follow the instructions below:
1. Press <MENU> repeatedly until the
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Test, or touch the display where it says Test.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN> to select Auto test, or touch the display where it says Auto test.
5. Press <ENTER>.

Manual test

To test the functions of the product manually, do the following:
1. Press <MENU> repeatedly until the
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Test, or touch the display where it says Test.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN> to select Manual Test, or touch the display where it says Manual Test.
5. If using the buttons instead of the touchscreen, press <ENTER>.
6. Use <UP> or <DOWN> to select the function to test, or touch the display where it says the desired
function
7. If using the buttons instead of the touchscreen, press <ENTER>.
8. Change the value of the tested function with one of the following methods:
• Type the desired value using the number pad that shows on the touchscreen display.
• Use <UP>, <RIGHT>, <DOWN>, or <LEFT> to increase or decrease the value.
9. Press <ENTER>.

System Information

All information about the current status of the Maverick MK1 Spot is available through the product's
Sys Info menu. To view this information, follow the instructions below:
1. Press <MENU> repeatedly until the
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Information, or touch the display where it
says Information.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP> or <DOWN> to select Fixture Information (shows firmware version, running mode,
starting address, etc.), Fan Information (shows speed of the head fans in rpm), Error
Information (shows any errors or No Error!), or Channel Information (shows the current value of
all signal input channels), or touch the display where it says the desired option.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to scroll through the information.
Maverick MK1 Spot User Manual Rev. 9
Home Screen shows on the display. Press <ENTER>.
Home Screen shows on the display. Press <ENTER>.
Home Screen shows on the display. Press <ENTER>.
Page 21 of 191