Brother P-Touch 2300 Guía De Usuario página 50

To change the size setting:
1 While holding down c, press 2 once, and keep c held down to display the
current size setting.
2 While still holding down c, continue pressing 2 until the desired size setting is
displayed.

The current size setting is shown by the size indicators at the top of the display.
3 Release c to apply the selected size setting to the entire text.

With the AUTO setting selected and 3/4" (18-mm) or 1" (24-mm)-wide tape
installed, text consisting of just one line of only capital letters (and no accented
characters) will be printed with a character size of 52 points. If 1/2" (12-mm)-wide
tape is installed, the text will be printed with a character size of 29 points.
EXAMPLE
To select the 24 point size setting:
1
While holding down
and keep
2
While still holding down
2
until 24 is displayed.
c
3
Release
46
c
, press
c
held down.
c
.
2
once,
, continue pressing
S I Z E
Alt
A U T O
Caps
S I Z E
Alt
2 4
Caps