Working With The Battery-Powered Clipping Machine Favorita; System Set-Up; Connecting The Accessories; Attaching The Blade - Aesculap Suhl FavoritaCL Instrucciones De Manejo

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 48
Aesculap Suhl GmbH
Battery-powered clipping machine Favorita
4.
Working with the battery-
powered clipping machine
Favorita
/Libra and charger
CL
GT203/Li-ion battery GT201

4.1 System set-up

4.1.1 Connecting the accessories

Combinations of accessories that are not mentioned in
the present instructions for use may only be employed
if they are specifically intended for the respective
application, and if they do not compromise the
performance and safety characteristics of the
products.
Please contact your B. Braun/Aesculap Partner or
Aesculap Technical Service (address: see Chapter
Technical Service) with any inquiries in this
respect.

4.1.2 Attaching the Blade

Risk of injury caused by sharp cut-
ting plates!
Apply proper care when handling
WARNING
and operating the blade of bat-
tery-powered clipping machine
Favorita
Note
The battery-powered clipping machine Favorita
ships without any blade. Instead, there is a range of
blades available for various applications!
Slide On/Off switch 12 upward to switch on
battery-powered clipping machine Favorita
Libra 3.
Push lever 2 towards the shell of the product.
Mount the blade on blade adapter 1.
Release lever 2.
This completes the mounting of the blade.
6
/Libra.
CL
/Libra
CL
/
CL
/Libra
CL
4.1.3 Connecting the charger/Charging the
Li-ion battery
Fire hazard due to battery poles
shorted by fluids or metal compo-
nents!
Do not short the Li-ion battery.
WARNING
Risk of injury and material damage
due to damaged Li-ion batteries!
Prior to charging, check the Li-
WARNING
ion batteries for any damage.
Do not use or charge damaged
Li-ion batteries.
Loss of capacity/performance due
to prolonged storage of discharged
Li-ion batteries!
Store Li-ion batteries only in
CAUTION
fully charged condition and
recharge stored batteries once
every month.
Destruction
charging bay or Li-ion battery when
inserting the wrong type of battery
in the charging bay!
CAUTION
Insert Li-ion batteries only in
the appropriate charging bay.
Insert the Li-ion battery in the
correct position.
Note
Prior to battery loading, switch off the battery-powered
clipping machine Favorita
Note
Li-ion batteries heat up slightly during charging.
of
the
product,
/Libra!
CL

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Libra

Tabla de contenido