Electronic Journal (Ej) Programming; Ej Memory Type; Function Parameters For Ej - Sharp XE-A201 Manual De Instrucciones

A201_3 FOR THE MANAGER

Electronic Journal (EJ) Programming

2
The cash register provides the electronic journal (EJ) function. By default, a maximum of 2000 lines can be
stored in memory. By decreasing the storable line numbers to 1000 lines you can expand the available number
of PLU codes to 1200.
For reading journal data, refer to "EJ REPORT READING AND RESETTING" (page 60).

EJ memory type

*A: 0 for EJ 1000 lines and PLU 1200 codes
1 for EJ 2000 lines and PLU 200 codes

Function parameters for EJ

* Item:
A Always enter 0.
B Always enter 0.
C Temporary EJ printing during transaction
D EJ printing and clearing EJ data when
issuing general Z1 report
PGM mode operation records type
E
F REG/MGR/VOID modes operation
records type
G Compressing printing for EJ data
H Action when EJ memory area is full
40
Downloaded from: http://www.usersmanualguide.com/
01.11.11 10:22 AM
When this procedure is executed, EJ data is cleared, and PLU data (programming data and sales
data) are reset to the default after all data is cleared even if the same memory type is selected.
s 90
Key operation example
s @
90
A
0
s 68
Page 40
@
*A
Print
To set "00000000"
@
*ABCDEFGH
Selection:
Disable
Enable*
No*
Yes
Details*
Header information only
Details*
Total
No (normal size)
Yes (small size)*
Continue
Continue and warning (near full warning)* 1
Lock and warning (with near full warning) 2
A
s A
Entry:
0
0
0
1
0
1
0
1
0
1
0
1
0