Publicidad
1 Description and Purpose
Application
Make sure that the user understands all the
information in these instructions for use,
particularly the maintenance information.
This device is a finishing component that
is only for use as a cosmetic cover on the
following Blatchford devices:
• Orion3
• Linx
Contra-indications
This device is for a single user.
2 Maintenance
Environment
Advise the user to report any changes in the
performance of this device to their clinician.
Changes in performance include unusual
noise or play.
Do not expose this device to
naked flames.
For more information about environmental
limitations on use, refer to Key Points in the
user guide that corresponds to your knee unit:
Linx
938354S
Orion3
938375
Cleaning
Use a damp cloth and a mild soap to clean
outside surfaces. Do not use aggressive
cleansers.
Doff the device to clean the interior, then dry
thoroughly before donning.
EN
3 Technical Data
Component Weight:
Material:
Fitting Length
Liability
The manufacturer recommends using the device
only under the specified conditions and for the
intended purposes. The device must be maintained
according to the instructions for use supplied
with the device. The manufacturer is not liable for
damage caused by component combinations that
were not authorized by the manufacturer.
CE Conformity
This product meets the requirements of 93/42/EEC
guidelines for medical products. This product has
been classified as a Class I Product according to
the classification criteria outlined in Appendix IX of
the guidelines. The Declaration of Conformity was
therefore created by Blatchford Products Limited
with sole responsibility according to Appendix VII of
the guidelines.
Warranty
This device is warranted for 6 months. The user
should be aware that changes or modifications
not expressly approved could void the warranty,
operating licenses and exemptions. See Blatchford
website for the current full warranty statement.
Environmental Aspects
This product is fabricated from a polyurethane
that cannot be easily recycled: please dispose of
it responsibly as general waste, as per local waste
handling regulations.
Manufacturer's Registered Address
Blatchford Products Limited, Lister Road,
Basingstoke RG22 4AH, UK.
Blatchford is a trademark of Blatchford Products Ltd.
2
313 mm
Knee center
425 g (15 oz)
Polyurethane
67 mm
938406/3-0719
Publicidad
