Auto-Dump; Installing Umbrella - Starblitz ASPIC Manual De Usuario

Auto-dump

AUTO-DUMP automatically discharges the capacitors when the power is reduced.
Excess energy is automatically dumped when the flash power setting is reduced.
Both increasing and decreasing the power setting generates heat inside the unit.
Therefore avoid repetitive power setting changes.

Installing umbrella

An umbrella with a handle diameter of 8 mm can be firmly secured in the umbrella
holder. When the standard reflector is used, fit the umbrella in the hole of the reflec-
tor (Fig. 8). Firmly press the umbrella shaft through the holder, the locking knob is
located on the side (Fig. 9 & 10).
(Fig. 8)
Do not over tighten to avoid damaging the shaft of the umbrella.
(Fig. 10)
(Fig. 9)
EN
FR
ES
19