dirna Bergstrom PGR COMPACT 3.0 Manual Del Usuario página 8

COMPACT 3.0
EN
Thank you for purchasing and placing your trust in our new range of products.
Compact 3.0 is a standalone A/C System suitable for use with the engine Off and engine On
( Night and Day use)
Compact 3.0 guarantees the climatic comfort in the vehicle´s cab during the resting periods
of the driver, loading and unloading operations as well as while driving.
Compact 3.0 is designed with the latest technology to obtain maximum performance, a
reduction in fuel costs and CO
These features are what make it unique in the automobile air-conditioning market.
The only maintenance required is periodic cleaning of the condenser and drain valves at least
1 time per year ((1) see page 12).
If you have any doubts, consult your dealer or dirna Bergstrom, s.l. directly.
Do not forget to request your fulfilled warranty card from the dealer.
You can also send your suggestions visiting our web www.bycool. com
!
!
(1) To carry out this operation, you must remove the upper plastic cap of the unit (7 screws), blow with compressed
air. This operation should be performed by the dirna Bergstrom Authorized Service dirna Bergstrom, s.l.
emissions to the atmosphere.
2
RECOMMENDATION:
For optimal operation of the unit, it is
recommended to start it up occasionally during
the winter months in order to prevent the joints
from deteriorating.
NOTE:
If, during assembly, the unit becomes slanted or
the cabin drops with the unit mounted, wait for
at least 60 minutes from the moment the unit is
horizontal before starting up.
8
®