Kicker KM6200 Manual Del Propietário página 3

and snap the locking terminal cover into place. Connect the other end of the heavy gauge wire to your
amplifi er in accordance with its owner's manual. Mount the locking terminal cover in a location free and
clear of standing water by utilizing the supplied zip ties through the integrated loops in the locking terminal
cover.
Mount the speaker
and grille right side-up
to take advantage of
the coaxial system's
integrated moisture
draining system.
Model:
Woofer Size | in [cm]
Tweeter Size | in [mm]
Dome Material
Nominal Impedance [Zn] | ohm
Power Handling | Watts, Peak (RMS)
Sensitivity [SPL0] | db @ 1W, 1m
Effective Frequency Range | Hz
Mounting Hole Diameter | in [cm]
Mounting Depth | in [cm]
Bolt-Thru Grilles
P.O. Box 459 • Stillwater, Oklahoma 74076 • USA • (405) 624–8510
KICKER Marine speakers use the highest level of magnetic shielding available to minimize compass and gauge
deviation in your dash. KICKER Marine speakers meet or exceed industry standards for environmental humidity and
corrosion, and for material degradation due to UV exposure.
2011 KM Coax RevC.indd 3 2011 KM Coax RevC.indd 3
Locking Terminal Cover
Loops for mounting with Zip Ties
MEMBER OF MEMBER OF
National Marine National Marine
Manufacturers Association Manufacturers Association
Wire Divider
KM6200
6 [16]
3/4 [20]
Titanium
4
195 [65]
90
35-21k
5 1/8 [13]
2 7/8 [7.2]
Yes
1/25/2011 4:46:46 PM 1/25/2011 4:46:46 PM
3