Prepare The Hood Location - JENN-AIR JXT-B Serie Manual De Uso

1. The Jenn-Air hood must be installed with interior blower
model H325B or H326B only. Other blowers cannot be
substituted. (Blowers sold separately.)
In addition to the blower models listed above, the hood is
also compatible with older internal blower versions H325
and H326. However, discard the installation instructions
included with those blowers and contact Jenn-Air to obtain
replacement instructions.
Plan where and how the ductwork will be located.
Install proper-sized ductwork, transition(s), elbow(s), and
roof or wall cap for the model of blower you are using.
For best results, use a minimum number of transitions and
elbows.
ROOF CAP
DECORATIVE
FLUE
(305 mm)
or SOFFIT
HOOD
24" TO 30" (609 to 762 mm)
ABOVE COOKING SURFACE
HH0024A
MODEL H325B SINGLE BLOWER
TYPICAL DUCTWORK
ROOF CAP
DECORATIVE 12"
FLUE
(305 mm)
or SOFFIT
HOOD
24" TO 30" (609 to 762 mm)
ABOVE COOKING SURFACE
HH0025A
MODEL H326B DUAL BLOWER
TYPICAL DUCTWORK

PREPARE THE HOOD LOCATION

7" (178 mm)
ROUND DUCT
12"
WALL CAP
7" (178 mm)
ROUND
ELBOW
10" (254 mm)
ROUND DUCT
WALL CAP
4-1/2" x 18-1/2"
to 10"
(114 x 470 to
254 mm) ROUND
TRANSITION
(see page 4)
2. Dimensions for the most common installations are shown
below.
Adjust your measurements for various heights of ceilings,
soffits, cabinets or cooktops. For proper operation, the
hood must be a minimum of 24" and a maximum of 30"
above the cooktop.
Standard 18" 18"
(457 mm) H
(457 mm)
over-cooktop
19"
cabinet
(483 mm)
Hood
24"
Minimum distance
(610 mm)
between the hood and
the cooktop
Cooktop
INSTALLATION WITH STANDARD 18'' HIGH
OVER-COOKTOP CABINET
Pro Style
INSTALLATION WITH 12'' SOFFIT OR
OPTIONAL PRO STYLE SOFFIT CHIMNEY
7
Standard
8 ft. (2.44 m)
ceiling
Top of wood
mounting strip
Pro Style
RMP Series
Backsplash
(optional)
Standard 36"
(914 mm)
H cooktop
HH0028A
Pro Style
Maximum distance
between the hood and
the cooktop