Denon AVR-2803 Instrucciones De Operación página 16

• Sets the Trigger Out output for the different input sources
1 _ At the System Setup Menu select "Trigger Out Setup"
System Setup Menu
3
_xt. In Su_fIr Level
Auto Surround Mode
On Screen DIspley
• TrlgIer Out Setup
Auto Tuner Presets
Setup Lock
Use the CURSOR button to select "Yes"
"Search" flashes on the screen and searching begins
"Completed" appears once searching is completed
The display automatically switches to screen
Switch to the Trigger Out Setup screen
• The system setup settings can be locked so that they cannot be changed easily
Trilser Out Setup
1 1
AttheSystemSetupMenuselect"SetupLock"
_ _ Select the input source and select "ON" or "OFF"
3®
(_ Enter the setting
The System Setup Menu reappears
[] SYetam Setup Menu
EXL In _k_lNr Level
Auto Surround Mode
On Screen Olsplly
Trigger Out Setup
Auto Tuner Pregetg
Setup Lock
Switch to the Setup Lock screen
Select "ON", to lock the system setup settings
Setup Lock
Use this to automatically search for FM broadcasts and store up to 40 stations at preset channels AI to 8, B1 to
8, C1 to 8, D1 toaandEt to8
NOTE:
• ]f an FM station cannot be preset automatically due to poor reception, use the "Manual tuning" operation to
tune in the station, then preset it using the manual "Preset memory" operation
_ At the System Setup Menu select "Auto Tuner Presets"
_ System Setup Menu
Ext, In Subl_flr Level
Auto Surround Mode
On Screen Olspley
Trliger Out Setup
_Auto Tuner Presets
Setup Lock
Press the ENTER button
The "Auto Preset Memory" screen appears
Auto Preset Memory
Auto Tuning &
Preset Station Memory
StorlnE Preee_ MemDry
_StNrt _<
Press the ENTER button to finalize the setting and exit the system setup mode
When the setup lock function is activated, the settings listed below cannot be changed,
and "Setup Locked" is displayed when related buttons are operated
• System setup settings
• Surround parameter settings
• Tone control settings
• Channel level settings (including test tones)
To unlock, press the System Setup button again and display the Setup Lock screen, then
select "OFF" and press "ENTER"
System setup is complete, Once these settings are made, there is no need to change them unless
different AV components are connected or the speakers are repositioned.
16