LaserLiner DigiLevel Pro 30 Manual De Instrucciones página 8

Ocultar thumbs Ver también para DigiLevel Pro 30:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 24
Read the operating instructions and the enclosed brochure
!
„Guarantee and additional notices" completely. Follow the
instructions they contain. This document must be kept in
a safe place and if the laser device is passed on, this document
must be passed on with it.
Digital electronic spirit level with vertical and horizontal angle
display and point laser (650 nm).
General safety instructions
• The device must only be used in accordance with its intended purpose
and within the scope of the specifications.
• Attention: Do not look into the direct or reflected beam.
• Do not point the laser beam towards persons.
• If a person's eyes are exposed to class 2 laser radiation, they should shut
their eyes and immediately move away from the beam.
• Under no circumstances should optical instruments (magnifying glass,
microscope, binoculars) be used to look at the laser beam or reflections.
• Do not use the laser at eye level (1.40 ... 1.90 m)
• Reflective, specular or shiny surfaces must be covered whilst laser
devices are in operation.
• In public areas shield off the laser beam with barriers and partitions
wherever possible and identify the laser area with warning signs.
• Tampering with (making changes to) the laser device is not permitted.
• This device is not a toy - keep out of the reach of children.
Inserting batteries:
Open the battery compartment (17) on the rear of the DigiLevel and
insert two new batteries (type AAA/LR03) in the manner indicated
by the installation symbols. Ensure correct polarity. The symbol (10)
indicates the level of battery charge.
Switching on and measuring:
The DigiLevel Pro can measure angles continuously to 360°.
• Switch the DigiLevel Pro on using the on/off switch (2).
• The current operating temperature in °C is shown for a few seconds.
• The slope angle is shown in the display (8). If slopes are measured
overhead, the direction of display adjusts automatically.
• The current slope direction is also shown by the symbol (7).
08
GB
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mw · 650 nm
EN 60825-1:2014

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Digilevel pro 60Digilevel pro 120

Tabla de contenido