EN 32
Initial set-up
Checking the pack contents
Risk of damage!
If you carelessly open the packaging
with a sharp knife or another sharp
object, the tracker can quickly
become damaged.
− Be very careful when opening
the packaging.
1. Take each individual part out of
the packaging.
2. Check whether everything has
been delivered.
3. Check whether individual parts
show any signs of damage.
If this is the case, do not
use the tracker. Contact the
manufacturer.
NOTE
Installing and charging the
battery
When you unpack the tracker for
the first time, the battery is empty.
Charge it as follows:
1. Open the battery cover and
insert the battery. Ensure it is
positioned correctly.
2. Connect the charging cable mi-
cro USB connector to the tracker.
3. Connect the other end of the
charging cable to the USB power
adaptor and then to the power
socket. Alternatively, you can also
connect the charging cable to a
computer.
4. Charge the tracker for 12 hours.
The red light will blink whilst
charging. When the tracker is fully
charged, the light will turn solid red.