Reference Measurement; Important Notices - LaserLiner DistanceMaster 100 Manual De Instrucciones

Reference measurement:

Reference length
4. Slow beeping:
The measurement is within ± 100 mm of the reference value.
Rapid beeping:
The measurement is within ± 1 mm of the reference value.

Important notices:

• The laser points to the location that will be measured. No objects may
get into the laser's line of measurement.
• The device compensates the measurement for different room
temperatures. Therefore allow the device a brief adaptation period
when changing locations with large temperature differences.
• The device is only conditionally useable in outdoor areas and cannot be
used in strong sunlight.
• The measurement results of outdoor measurements may be influenced
or falsified by rain, fog and snow.
• In unfavourable conditions, e.g. with poorly reflecting surfaces, the
maximumdeviationmaybegreaterthan3 mm.
• Carpeting, upholstery or curtains will not reflect the laser optimally.
Measure to flat surfaces.
• Measurements made through glass (window panes) can falsify
measurement results.
• An energy-saving function switches the device off automatically.
• Clean with a soft cloth. Water may not be allowed to penetrate the
housing.
16
GB
1a. Number 1b. Number 2. Define reference
selection
reference
Set reference length
set-up
3. Now move the laser
90°
forward and back.
stop
1x
value
1x