Changing Settings; Clock Setting - KitchenAid KMCM 3800 Instrucciones De Uso

Changing Settings

When the appliance is first plugged in it will ask you to set the clock.
After a power failure the clock will flash and needs to be reset.
Your oven has a number of functions which can be adjusted to your personal taste.
6. Press the Manual button
7. Use the Up & Down buttons to choose one of the following settings to adjust:
• Language
• Clock
• Brightness
• Eco
• Sound
8. Press the Stop button to exit the settings function and save all your changes when you are done.
Language
9. Press the OK button .
10. Use the Up & Down buttons to choose one of the available languages.
11. Press the OK button again to confirm the change.

Clock setting

Keep the door open while setting the clock. This gives you 5 minutes to complete the setting of the
clock. Otherwise, each step must be accomplished within 60 seconds.
1. Press the OK button (the left right hand digits (hours) flicker).
2. Press the UP & Down buttons to set the hours.
3. Press the OK button. (the two right hand digits (minutes) flicker).
4. Press the UP & Down buttons to set the minutes.
5. Press the OK button again to confirm the change.
The clock is set and in operation.
If you wish to remove the clock from the display once it has been set, simply enter the clock setting
mode again and press the stop button while the digits flicker.

until setting is shown.
12






 
