Accessories - Sunrise Medical Jay Easy Manual Del Usuario

ENGLISH
SPINE ALIGN POSITIONING COMPONENTS
Spine Align Positioning components are designed to
pro vide intimately shaped support within an "off-the-
shelf" back. (Depending on your market, Spine Align
components may be included with your back.) To install
Spine Align components please read the following
directions.
1. Spine Align Positioning component Installation
(Fig.9-11)
• have the user remove pressure from the Jay
easy Back by leaning or sliding partially forward if
possible.
• Release the pocket at the top of the cover and lift the
cover forward to reveal the inside of the easy Back,
(Fig.9.0).
• Place the positioning component(s) on the Velcro
inside of the shell and reattach the top pocket. Pull
down making certain that the top seam is aligned
with the top of the shell. if seam does not line up, the
bottom of the cover may need to be loosened.
• have the user test the current Spine Align setup for
comfort and support and repeat the above steps
until adjust ment is complete.
• Multiple configurations and combinations of Spine
Align components can be used. if additional Spine
Align shapes or sizes are required, please contact
your deal er or Sunrise Medical.
• installation of the Jay easy Back is complete.
Jay Easy Accessories
if you have ordered J3 accessories such as laterals,
head rests or harnesses please consult the installation
instructions related to those items.
Positioning Components
large lumbar
Small lumbar
Wedge
curved Shim
Flat Shim
Posterior/lateral Pelvic
lateral Shim
large Bean Bag
Small Bean Bag
Jay easy Back 122915
Top seam
Top cover flap
11

ACCESSORIES

Fig.9.0
Fig.10.0
Fig.11.0
cover
Spine Align
components
US=Rev.B, eU=Rev.2.0