Tabla de contenido
Publicidad
4
5
6a
22
English
Wrap the threads on the nipple using plumber's tape.
Install the adapter on the nipple.
Wrap the threads on the adapter using plumber's
tape.
Install the shower module/adapter assembly using
the service key and a 10 mm Allen wrench.
10 mm
Use a level to make sure that the flat edges of the
nipple flange are level.
Use the service key to reposition the flange if
necessary.
If you wish to be able to tilt the spray up and down,
the flat edges should be at the top and bottom.
Do not over-tighten.
Free installation
Publicidad
Tabla de contenido
