Switching Swivel Spots On / Off; Replacing Batteries; Cleaning And Care - LIVARNO LUX HG00092A Instrucciones De Montaje, De Uso Y De Seguridad

Switching swivel spots on / off

The LED light
1
has three settings:
Press on / off switch once: high light output.
Press on / off switch again: low light output.
Press the on / off switch again: turns the light off.

Replacing batteries

Slide the mounting plate
two battery compartments at the rear centre of the LED light
Fig. F).
Press the handle on the battery compartment slightly toward the
compartment and lift the battery compartment cover
battery compartment.
Remove old used batteries from battery compartment (if applicable).
Insert batteries in the compartment as indicated.
Replace the battery cover to close the battery compartment.
Apply light pressure until the handle locks in again.

Cleaning and Care

Use a dry, soft and lint-free cloth for cleaning and care. Use a
slightly dampened cloth and a mild detergent to remove stubborn
dirt.
is controlled using the On / Off switch
and remove from the bracket. There are
7
. This button
3
(see
1
to open the
4
GB/IE 21