Maintenance - Load UP 75033 Manual De Instrucciones

Note: the overloading DC output will trip the DC output overcurrent protector.
(when this button is projected, wait a few minutes to restart the protector).

7. MAINTENANCE

Item Remarks
Spark plug Remove carbon.
Adjust gap.
Replace if necessary.
Air filter Clean.
Replace if necessary.
Fuel filter Clean.
Replace if necessary.
Motor oil Check.
Refresh:
first time after 50 hours.
Valve Check if necessary.
clearance
Fuel hose Check.
Carburetor Check.
SPARK PLUG
1. Remove spark plug.
Daily Every 50
hours or
every
month
▀
28
Every 150
hours or
every 12
months
▀
▀
▀
▀
▀
▀
▀