Virax GR2-12 Manual De Instrucciones página 17

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 42
When swarf or other foreign bodies are being removed.
When connecting the plug, the main unit could start up unexpectedly and cause an accident.
7.
If any anomaly is detected stop the machine immediately.
When the machine does not operate smoothly or if any anomalies such as odours, vibrations or unusual noises are
detected stop the machine immediately.
Check the symptoms for each item in the section entitled, "Possible causes of malfunctions" at the end of this manual
and follow the relevant instructions. Continued use of the machine can lead to overheating, smoke or
fire which could cause accidents or injury.
If overheating occurs, or if smoke is produced by the machine, do not try to repair the machine yourself and
request inspection and repair.
8.
Keep the workplace clean.
Ensure that the work table and the workplace are in good condition and well lit.
An untidy workplace and work table can cause accidents.
9.
Do not allow unauthorised personnel near the machine.
Do not allow the main unit or the power supply cable to be touched and do not allow unauthorised
personnel to operate the machine.
Do not allow unauthorised personnel to enter the workplace, especially children. Injuries could occur.
10.
Do not use the machine with force.
Only use the machine for the designated purpose. Work according to the capacity of the main unit in order to guarantee
safe and efficient operation. Excessive force could not only damage the product but also cause accidents.
Do not use the machine in any way that could cause the motor to lock or cause smoke or fire.
11.
Wear close-fitting clothing.
Do not wear ties, garments with open sleeves, loose garments, accessories such as necklaces, etc., which could get
caught in rotating parts.
When working outside it is recommended to use rubber gloves and shoes with studs. Slippery gloves and footwear
can lead to injuries.
Cover long hair with a cap or net to prevent it from becoming caught in rotating parts.
Wear a safety helmet, safety footwear, etc. in accordance with the working environment.
12.
Do not work in an unnatural posture.
Keep a firm footing and balance to avoid falling and injury.
13.
Remove tools such as spanners.
Before putting the switch to the ON position, check that the inspection and adjustment tools have been removed.
The operation of the machine whilst tools are inside could cause accidents and injury.
14.
Operate the machine with extreme care.
Always work by paying great attention to the handling of the machine, the working methods and the surrounding
conditions. Carelessness could result in accidents and injury.
Do not work with the machine if you have low concentration levels such as when you are tired, after consuming
alcohol, whilst ill, under the effects of medication, etc.
15.
Do not handle the power supply cable inappropriately.
Do not carry the product by the cable or pull on the cable to disconnect it.
Do not place the cable close to hot objects, grease and oils, scissors or sharp objects.
Do not stand on the cable, pull it or apply excessive force which could damage it. This could
cause an electric shock or short-circuit leading to fires.
16.
Carry out maintenance on a daily basis.
Follow the instruction manual when changing accessories and parts.
Periodically inspect the power supply cable and plug. If damaged, call the distributor or the sales division for repair.
It you use an extension cable inspect it periodically and change if damaged.
If you use extension cables outside, use those intended for outdoor use to avoid electric shocks, short-circuits or fire.
Keep parts used for gripping dry and clean and free from oil and grease. If they are slippery injury could result.
17.
Check that there are no damaged parts.
Before using the machine, carefully check for damage to the protection parts and other parts and check normal
operation of the machine and its functions.
Check that there are no anomalies in the adjustment of movable parts, tightening, damaged parts and other
SAFETY
ENGLISH
17

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

162600

Tabla de contenido