Description Of Symbols - Triton TQTRSS Instrucciones De Uso

Introduction
Thank you for purchasing this Triton product. This manual contains information
necessary for safe and effective operation of this product. This product has unique
features and, even if you are familiar with similar products, it is necessary to read this
manual carefully to ensure you fully understand the instructions. Ensure all users of
the product read and fully understand this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important information about
the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Class II construction (double insulated for additional protection)
Toxic fumes or gases!
Read instruction manual
Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or retailer
for recycling advice.
Conforms to relevant legislation and safety standards.
Dust extraction required or recommended
EN
4
Original Instructions
Technical Abbreviations Key
V
~, a.c.
n
0
n
opm
Hz
W, kW
/min or min
dB(A)
Specification
Voltage:
Power:
No load speed:
Dimensions (L x W x H):
Base measurements:
Sanding sheet type:
Sanding sheet dimensions:
Protection class:
Ingress protection:
Power cord length:
Weight:
As part of our ongoing product development, specifications of Triton products may
alter without notice.
Sound pressure LPA:
Sound power LWA:
Uncertainty K:
Typical weighted vibration a
Uncertainty K:
The sound intensity level for the operator may exceed 85dB(A) and sound protection
measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the
time of exposure if necessary. If sound levels are uncomfortable, even with ear protection, stop
using the tool immediately and check the ear protection is correctly fitted and provides the
correct level of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long-term exposure can lead to a chronic condition. If
necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do not
operate the tool with hands below a normal comfortable temperature, as vibration will have a
greater effect. Use the figures provided in the specification relating to vibration to calculate the
duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to international
standards. The figures represent normal use for the tool in normal working conditions. A poorly
maintained, incorrectly assembled, or misused tool, may produce increased levels of noise
and vibration. www.osha.europa.eu provides information on sound and vibration levels in the
workplace that may be useful to domestic users who use tools for long periods of time.
Volts
Alternating current
No load speed
Rated speed
Orbits or oscillations per minute
Hertz
Watt, kilowatt
-1 Operations per minute
Decibel sound level (A weighted)
230V~50Hz
200W
12,000min
257 x 114 x 150mm
110 x 100mm
Hook and loop
113 x 105mm
IPX0
3m
1.35kg
84.5dB(A)
73.5dB(A)
3dB
: 3.302m/s
h
1.5m/s
2
-1
2