Get Started - Silk’n Face Tite Instrucciones De Uso

Warning: Keep Silk'n
®
fall, be pushed or placed into a tub, sink or any other vessel containing water.

6. Get Started!

1. Remove Silk'n FaceTite™ DEVICE and other components from box.
®
2. Plug the POWER ADAPTOR cord into the Silk'n
3. Plug the POWER ADAPTOR into an electrical outlet. All five indicator lights will cycle repeatedly one after
the other.
4. The device is now in STANDBY mode and is ready to start.
5. Press the CENTRAL BUTTON. The device will turn on to energy level 1 automatically. One INDICATOR
LIGHT will turn on.
Setting Energy Levels:
Silk'n FaceTite™ offers 5 levels of energy represented by 5 ENERGY LEVEL INDICATOR LIGHTS.
®
The selected energy level determines the intensity of Silk'n® FaceTite™ energy delivered to
your skin.
To set an energy level, press the CENTRAL BUTTON repeatedly to move between energies,
from 1 to 5 and back to 1.
When the desired energy is set, the ENERGY LEVEL INDICATOR LIGHTS will indicate the level chosen.
To put FaceTite™ back in standby mode, hold the CENTRAL BUTTON until all five lights will
cycle continuously.
If you wish to change energy levels mid-treatment, press the button again. This will change the
energy level on the spot and allow you to treat the same or different areas with different energy
levels according to your preferences.
6. After setting the energy level for the treatment, spread a layer of Silk'n
to treat.
Please Note: Slider Gel (or any other water-based clear gel) facilitates smooth movement of the
treatment surface over the skin and enables conductivity. To ensure safe and efficient treatment, always
start by applying Slider Gel!
FaceTite™ away from water! Do not place or store Silk'n
FaceTite™ socket.
®
®
FaceTite™ where it can
®
Slider Gel over the area you intend
5